The indicator light on the operation panel operates normally without any abnormal alarms
2. Confirm that the air pressure gauge is within the range of (0.4-0.6MPa)
3. Confirm that there is no air leakage in the air pressure system, no abnormal noise in the motor and moving parts, and no water leakage in the cutting fluid pipeline
4. Clean the operation panel with a dry cloth and ensure that the panel is clean
5. Organize the cutting fluid filter screen and adhere to cleanliness
6. Confirm that the spindle cooling fan operates normally
At the end of each shift, clean the aluminum shavings and other debris inside the machine and adhere to the internal cleanliness of the machine
8. Check if the cutting fluid level is normal, and adjust if it is not normal
9. Check the function of the safety door. When the machine is running, it is normal to open the protective door and the machine stops running
10 air pressure detection function, it is normal to turn off the air source and display a low air pressure alarm
11. Check the emergency stop function. Press the emergency stop button while the machine is running, and the machine immediately stops running as normal
12. Check if the subordinate equipment of the machine tool is intact and clean it
Weekly maintenance of CNC
1. Use a dry cloth to wipe the surface of the machine, including the surface on the top cover and the motor casing, and adhere to a clean and tidy appearance
2. Sort out foreign objects in the cutting fluid water tank and pipelines, and ensure that the pipelines are unobstructed
3. Clean the spindle end face, inner cone hole (cleaning rod), and tool magazine, and clean them with a cloth
4. Clean the moisture inside the three-point combination water collector
