1. Common faults of the main axis of the process of processing. For analysis of the problem, you can start from the following four points:
1. Please check whether the hand axis tenon switch switch is adverse in contact;
2. The spindle multiple is selected "Poor Poor Power Switch Contact";
3. Please check whether the main axis single pulse is destroyed;
4. Please check whether the spindle electrode connection is broken.
2. The common failure of the core spindle of the core main spindle from the following four points can be treated from the following four points
1. Enter the system software, confirm the access to the contact point of the contact point to match the contact point of the contact point (here refers to the intact condition of the electrode connection line).
2. Enter the system software, confirm the observation multiples of the power switch to match the contact point (here to refer to the intact condition of the electrode connection line).
3. Remove the single pulse plate to accurately measure the switching power supply. See if the power supply can be normal, is + and A, + and B whether the middle resistance value is normal. If it is damaged, please disassemble the switching power supply.
4. Enter the system software, conduct a confirmation observation check, check the contact point of each power switch to match the contact point, and accurately measure the power switch of the axis, multiple power switches, check the contact points of the electrode connection cable in the middle of the single pulse disc, and the input system with the entry system Is there a guide between the corresponding point of the software wiring terminal? If the inspection is broken, you can change it immediately
