I. The operator must be familiar with the structure, performance and transmission system, lubrication parts, electrical and maintenance methods of the machine tool, and the maintenance method of use. The operator must be passed after the assessment is qualified before it can be operated.
2. Do it before work:
1. Check the amount of oil in the oil storage site of the lubrication system shall meet the requirements;
2. Must be tightly clothing, sleeves, worn caps, and protective glasses. Check the position of each handle during work
The correctness of the transform should be kept in the positioning position. It is strictly forbidden to wear scarves, gloves, skirts, and cool.
Shoes and high -heeled shoes work. It is strictly forbidden to wear gloves at work.
3. Check the fuselage, guide rail, and major sliding surfaces. If there are obstacles, tools, dust impurities, etc., you must clean, wipe it clean, and oil.
4. Inspection of the workbench, the guide track and the main slide surface are new pulling, research, and bumps.
5. Check the devices such as safety protection, braking (stopping) and changing direction.
6. Check the operating valve, switch, etc. in a non -work position. Whether it is flexible, accurate, and reliable.
7. Checking the tool should be in a non -working position. Check whether the tool and blade are loose and check whether the operating panel is abnormal.
8. Check that the electrical power distribution box should be closed firmly, and the electrical ground is good.
3. Do it seriously at work:
1. Persevere in the post, carefully operate, and do not do things that have nothing to do with work. Park when you leave the machine.
2. Processing in accordance with the process regulations. It is not allowed to increase the amount of knife and cutting at will. Not allowed to be super standard, oversupply
