For vertical machining center manufacturers, the programming, operation, maintenance and other work of the CNC system must be operated by professionals who have received professional technical training and guidance, familiar with the data used, strong electrical configuration, hydraulic, pneumatic and other operating principles and operating procedures. Operate reasonably according to requirements, effectively avoiding malfunctions caused by improper operations.
Input device: The disk total machine is the main input device of the CNC system, and related programs such as CNC system parameters, user macro programs, and part machining programs need to be input into the CNC through it. For the tape reading part of the paper tape reader, errors may occur in the information of the paper tape being read. Therefore, operators should clean the reading head, paper tape pressure plate, etc. every day.
To avoid overheating in vertical machining centers: Regularly clean the ventilation and heat dissipation system of the CNC device, and also regularly check whether the cooling fans on the CNC device are working properly. The vertical machining center should be cleaned every six months or every quarter. The specific method is as follows:
Unscrew the screws and remove the air filter. While gently vibrating the filter, use compressed air to blow away the dust from the air filter from the inside out.
When cleaning the filter, a neutral cleaning agent can be used for rinsing. Do not rub it, and leave it in a cool place to dry.
