1、 Power requirements. The general CNC processing is set up on the mechanical processing site, which not only causes significant changes in environmental temperature and poor operating conditions, but also involves a variety of electromechanical equipment and significant changes in the power grid. Therefore, setting the orientation of the machining center requires strict control of the power supply voltage. The change in power supply voltage is necessary to be relatively stable within the allowable range. Otherwise, it will affect the normal operation of the CNC system of the CNC lathe machining center.
2、 Requirements for the azimuth environment of CNC lathe machining centers. The orientation of the CNC lathe machining center should be away from the vibration source, to prevent the influence of direct sunlight and thermal radiation, and to prevent the influence of moisture and airflow. When there is an oscillation source near the CNC machine tool, it is necessary to set up anti vibration grooves around the machining center. Otherwise, it will directly affect the machining accuracy and stability of the CNC machining center, resulting in poor contact of electronic components and failure, which will affect the reliability of the machining center.
Which company is good for CNC lathe processing
3、 Use the machining center according to the instructions and rules. When users use the machining center, the parameters set by the manufacturer in the control system must not be changed arbitrarily. The setting of these machining center parameters is directly related to the dynamic characteristics of each component of the machining center. Only the gap compensation parameter value can be adjusted according to the actual situation.
4、 Temperature conditions. The environmental temperature of CNC machining centers is below 30 degrees, and the relative temperature is below 80%. Generally speaking, exhaust fans and cooling fans are installed inside the CNC control box to maintain the working temperature of electronic components, especially the central processing unit, with a certain or small temperature difference change. Excessive temperature and humidity can decrease the lifespan of control system components and increase malfunctions. The increase in temperature and humidity, as well as the increase in dust, will stick to the integrated circuit board, causing a short circuit.
