1. Before the four -axis CNC processing is performed, it is recommended to use a calibration instrument to check whether the tool is operated within the allowable tolerance range. Before processing, you should use a wind gun to blow the knife head and lock nozzle, or wipe it with a cloth to install the knife, otherwise it will have a certain impact on accuracy and quality.
2. When the four -axis CNC processing workpiece, the program list should be clearly clear, including models, names, program names, processing content, tool size, feed, especially the safe length of the knife clip, the reserved amount of each program, and the amount of each program, and the amount of each program, and the reserved amount of each program, and the amount of margin of each program, and the amount of reservation of each program, and the amount of margin of each program, and the amount of reservation of each program, and the amount of margin of each program, and the amount of reserves of each program, and the amount of reservation of each program, and the amount of reservation of each program, and the amount of reserves of each program, and the amount of reserved each program, and the amount of margin of each program, and the amount of reserves of each program and the amount of margin of each program. The indicator light. It must be clearly pointed out.
3. The list of CNC processing workpieces should be consistent with the reference angle indicated by the mold, and then check the upper 3D map, especially the workpiece that has drilled water transportation. You must check whether the level of 3D diagrams and workpieces is consistent.
4. Before processing, you must understand the content of the CNC processing process. The process must be attached to 2D or 3D stickers, and the six -sided data of "X long, y wide, Z high" must be marked. It is convenient for technical personnel to check whether the data is correct after processing. If there is a tolerance, the tolerance data should be indicated.
5. Reasonable use of the four -axis CNC processing tools should be cautious to distinguish between steel and copper processing, whether the remaining amount of the light knife is reasonable to ensure the smoothness of the workpiece and the life of the tools.
6. In the clamping process, please pay attention to whether the name and model of the CNC processing workpiece are the same as the model list, whether the material size matches, whether the clamp height is high enough, and the number of caliper used.
7. The speed of the four -axis CNC processing requires the technical operator to strictly control it. When F speed is fast, the main axis of S should be accelerated. The speed of the paper must be adjusted in different areas. After processing, there is no problem with the quality of the inspection, and then the processing process of the four -axis CNC can be completed.
