Many people have always been understood by the concept of Longmen Processing Center. The Longmen Processing Center is a CNC machine tool with a tool and an automatic knife -changing device. It can be said to be small and medium -sized processing equipment. Knife, so the Longmen Processing Center also has its own tool. The main axis unit of high rigidity and high precisionness is used on the main axis of the Longmen Machining Center. The bearings use imported components. Therefore, it can have higher operating speed in a very short time.
So how to do well in Longmen Processing Center:
1. Check the air path system, clean the air filter, remove the leakage of the pressure gases; observe the fluid road system, and effectively clean the filter and fuel tank, replace the filtering oil, and change the sealing parts in severe cases.
2. Lubricating system, pressure meter state, cleaning the lubricating system filter to check, replace the lubricating oil, dredge the oil circuit; the oil lubrication site, and add lubricating fat according to relevant requirements.
3. Check the status of the knife library and robotic hand, analyze the grinding status of the robot, and make suggestions for replacement to customers.
4. Tighten each transmission component, replace the adverse standard parts, check the protective cover status, and accurately feedback the information to the customer.
