The lathe is a commonly used machine tools in various machine tools. Before operating the machine tool, we must fully grasp the general knowledge of safety operation procedures and machine tool maintenance, and can operate and safeguard the machine tool independently. It is necessary to develop the habit of safe and civilized production, good professional ethics and strict labor discipline. CNC processing manufacturer
The machine tool is 380V. When the machine is cutting the workpiece, the mounts and workpieces are rotated at a high speed. When the lathe is in contact with the workpiece, the iron dumbs are generated. At this time, you must pay attention to safety. If you have negligence, a personal accident will occur. Therefore, the safety operation specifications of machine tools are particularly important.
Before opening the motivation tool, check whether each part of the machine tool mechanism is intact, and whether the position of the transmission handle and the transmission handle is correct to prevent the machine tool from being damaged suddenly when it starts. After the machine tool starts, the main shaft must be air-rotated at a low speed for 1-2 minutes, so that the lubricant is distributed to the place where lubrication is needed, and the machine tool can work normally. During the lathe processing process, if the main axis needs to be changed, it must be stopped before the transmission. In addition, when high -speed cutting workpieces, we must wear work clothes, protective glasses, and working caps. In the process of processing workpiece in the lathe, the operator's head should not be too close to the workpiece, should not wear a ring and other accessories, should not wear gloves, do not apply hand -rotated cards. , Do not apply the surface of the hand -touch workpiece, the main power of the machine tool should be shut down, after the processing work should be cleared during the cutting process to remove the iron dumbs remaining on the lathe parts on the workpiece.
