1. Select the lubricant: The mixture of oil and butter is not easy to be too thick.
2. Lubrication part: x.y.z three -axis screw. Light bar.
3. Lubrication steps: Before lubrication, remove the screw before the rails and the impurities in the bearing on the guide track. If you cannot remove it, you can use gasoline to clean it. Board, three -axis running.
4. Lubrication cycle: Depending on the working environment and working hours of the machine, it is generally cleaned up after get off work every day. Refuge in various parts every month and lubricate at high speeds.
