Large -scale rotating structure parts are generally processed on the vertical lathe. However, large vertical lathe blade turning angles often have a certain range of restrictions. How to solve the class problem? We encountered this problem when we processing a product die -casting mold
The cone parts with a large diameter in the vertical lathe are relatively complicated and bulky labor. Through practice, our company summarizes the various methods of using the vertical lathe -cutting cone under different conditions to improve production efficiency. Reduce workers' labor intensity. First, the knife method is manual (usually one direction is mobile, and the other direction is manual) in the horizontal and vertical direction at the same time, the car is used to cut the taper at the same time. This is a commonly used car cone rush -knife method. The rush -knife method is mainly used for the part of the car, it is mainly used for parts with low accuracy of the car and the low processing accuracy.
In order to enable the vertical lathe to achieve the processing and processing accuracy requirements of large diameter sphere, a practical device is designed, and the structural principles and processing methods of the device are described in detail. After actual use, the device expands the process of processing the processing of ordinary vertical lathes. It is convenient for workers to operate, easy to install, adjust and disassemble, safe and reliable, and effective in production actual production.
