When operating the processing center, it is necessary to understand the safety operation specifications of the CNC processing center in advance. This is not only the need to ensure the safety of personal and equipment, but also to ensure that CNC processing can work normally, achieve technical performance, and give full play to its needs. So what is the safe operation specification process of CNC processing?
1. Before booting
1. Wear labor insurance products, do not wear gloves to operate machine tools.
2. Read the instruction manual of the machine tool in detail to safety accidents before the machine tool operation.
3. The operator needs to be familiar with the role of each button and operation precautions.
4. Pay attention to the content of warning on the warning sign of various parts of the machine tool.
5. Add lubricating and hydraulic oil according to the requirements of the machine tool.
6. The tools around the machine tool should be placed neatly to make the ten.
7. Add the protective door of the machine tool before.
Two, at work
1. Civilized production, concentrated energy, eliminating sprinkler and fatigue operations; sprinkle and fatigue operations, chatting, sleeping, sleeping, and leaving arbitrarily.
2. When the machine tool is warm, the operator does not turn on and contact the site with lightning on the machine tool with a strong electric device to prevent the electrical injury.
3. Pay attention to check whether the workpiece and tools are correct and reliable. After the knife is packed, the trial cut should be used manually.
4. The machine tool running scarf, do not remove the chips, avoid contact with the machine and bed motion components.
5. When removing dandruff, use a certain tool, pay attention to the scratching hands and feet of the wood.
6. When measuring the workpiece, it is necessary to stop in the machine tool.
