Dragon Gate Processing Center Classification:
There are fixed beams (fixed beams, turning in the workbench), beam type (moving up and down beams, moving front and rear movements) movement column type (workbench solid, dragon door frame movement), Tianxian type (fixed workbench, beam movement mobile, mobile beams movement ) There are also multi -type dragon gate processing centers in the above composite form. The characteristics of processing, ability, and product processing are not exactly the same.
Structural characteristics of Longmen Processing Center:
1 workbench
The workbench of the Longmen Processing Center is basically rectangular. Large castings such as the workbench, bed body, columns, beams, and sliding pillows are used in Mihanna cast iron. The inner cavity of the casting is composite in the casting. The design is advanced. Ensure the stability of the processing accuracy of the workpiece and the life of the machine.
2 Longmen
Longmen consists of one beam and two columns. It is divided into three types: beams fixed, beams lock in segmented locks, and arbitrarily lifts and lifts on beams.
3 sliding pillow
Sliding pillows can be divided into two types: open and closed. The open pillow of the open structure is clamped on the main shaft box through the pressure plate, and the cross -sectional area of the sliding pillow is large; the sliding pillow of the closed structure is clamped in the main shaft box, and the cross -sectional area of the sliding pillow is small.
4 knife library
The basic types of the blade include three types: turning tower, wheel drum type and chain -long.
5 Annex head library
The processing of large -scale complex parts usually requires a lot of accessories. The attachment header is specially designed according to the processing requirements of the workpiece. Generally, it is divided into right -angle heads, extended heads, special angle heads, and universal heads.
6 CNC system
The CNC systems generally use the 31I series of Sinumerik840c and 840D or Japanese Fanuc of Germany. The CNC shafts are controlled by full -loop.
7 precision
The accuracy of the machine tool means that the machine is not in
