The operation of the carving and milling machine needs to be paid attention to, reducing the probability of the occurrence of accidents
1. Check the temperature and quantity of the coolant in the carved and milling cooler. Once the quantity is insufficient, it needs to be added in time. In addition, it is necessary to ensure that the coolant will not be frozen and can circulate normally.
Second, the materials for general cards need to be fixed firmly, and will not easily shake and other phenomena. Otherwise, it will easily trigger various degrees of accidents and prohibit carving and milling in places where the materials are suspended.
Third, when installing a card knife, people need to penetrate the knife handle inside the relevant stuck head. The length is generally more than eighteen millimeters, otherwise it will be easy to loosen. In addition, before installing a knife, people need to carefully check whether there is dirty in the stuck head. If you have dirty, you need to clean it well to ensure that the installation is reliable and no problems will occur easily.
Fourth, when processing, people use metal materials, so you need to use blood cutting to ensure reducing wear on tools.
Fifth, in the process of carving and milling, people should prohibit close observation and cutting surfaces, otherwise they will easily cause cut chips into the eyes and cause unnecessary safety issues. When observing, people should turn off the carving and milling machine to ensure that they are no longer in the state of motion.
