In addition to pursuing the initial conditions for the appearance of mechanical structural components, feasible mechanical operation standards and corresponding professional processing bodies should also be optimized and organized.
System processes. In the process of formulating processing technology, it is necessary to ensure some simple and basic functions. After confirmation, the positioning reference should be used and completed.
The quantity is consistent with the benchmark used in the design drawings. If two benchmarks are not coordinated consistently, try to choose high-quality and reliable benchmarks. There are more than two.
If the design reference points are on the same plane, we can select and locate each point on the plane, with the main function of design.
Accurate positioning.
Mechanical component processing - Reasonable cutting parameter settings are a key factor in obtaining surface quality.
Cutting parameters refer to the use of machinery during the machining process.
Various processing data, such as tool angle, cutting speed, cutting depth, feed rate, etc. Meanwhile, during the process of machining parts, it is necessary to follow.
Reasonably select the material and size of the parts. It is a cutting parameter. In the plastic processing process, if you choose a tool with a larger rake angle.
Tools can suppress the accumulation of debris. Increasing the front corner of the tool can reduce cutting force and deformation of the cutting tool. It shortens the cutting tool.
The contact length with the cutting tool can prevent the formation of chip protrusions.
Machining and grinding of mechanical parts for ultra precision cutting and low roughness workpieces.
What is ultra precision cutting, as a scientific processing method that utilizes rare high-tech interference to some values of the external friction coefficient of components,
Realizing today's challenging micro cutting processing technology. The difficulty is that the naked eye cannot.
High speed cutting must always be maintained, and the amount of cutting tools should be as small as possible. In this way, the surface of the workpiece can be smoother and reduce residue on the surface.
The mechanical parts processing plant adopts methods such as ultra precision machining, constant grinding, and grinding as subsequent processes for processing. Make the surface of the workpiece rough.
The degree is controlled in a lower area, usually using relatively fine and close processing methods, which must be completed after basic processing.
For the final step of processing, some workpieces can not only reduce the surface roughness of the workpiece, but also reduce the surface roughness of the workpiece.
Injury. In addition, we should also use this technology to reduce the surface roughness of the workpiece, which can gradually reduce costs and achieve a large number of machine tools to enter.
Simultaneously running to achieve high productivity and efficiency. After adopting this method, there are some machined parts corresponding to the grinding method.
Recognition and application of many mechanical processing factories. Nowadays, mechanical processing and grinding have been widely used in the production and processing of workpiece surfaces. Speaking of the operation of the grinding process.
