Do you understand the machining of mechanical parts? Next, the editor will introduce it to you, hoping it will be helpful to you. In order to ensure the efficiency of mechanical parts processing and qualified product quality, it is necessary to follow the four principles of mechanical processing.
1. Benchmark:
When using mechanical equipment to process products, it is necessary to determine the reference plane for positioning in subsequent processing. After determining the reference plane, the reference plane must be machined first.
2. Divided into processing stages:
When processing products, different degrees of processing need to be carried out according to different product requirements, and the degree of processing needs to be divided. If the accuracy requirement is not high, only a simple rough machining stage needs to be carried out. The product schedule requirements are becoming increasingly strict, and the semi precision and precision processing stages will be carried out in subsequent stages.
3. Face before hole:
During mechanical processing, for workpieces such as brackets, not only plane machining is required, but also mechanical hole machining is required. In order to reduce the accuracy error of machining holes, machining the plane first and then the hole is beneficial for reducing the error.
4. Finishing:
This type of mechanical processing principle is generally a polishing process, usually the step after the product has completed its architecture.
