1. Improve the comprehensive quality of the operator
The processing center is a typical mechanical and electrical integration product, and the knowledge involved is relatively wide, so operators should have professional knowledge related to organic, electricity, fluid, qi, etc.; If you do not conduct professional training, it is difficult to master the application of a new generation of Cleelasses. Therefore, the application of the processing center is relatively high in professional knowledge of operators. Therefore, it is also necessary to systematically train the operator. When there is a problem with the processing center, the operator should have an analytical ability.
2. Strictly follow the correct operating regulations
No matter what type of processing center, there is a set of operating procedures, which is not only one of the important measures to ensure the personal safety of the operator, but also an important measure to ensure the safety of equipment and the quality of product quality. Therefore, the operator must operate correctly in accordance with the operating regulations. If the machine tool is used for the first time or has not been used for a long time, it should first take about 10 minutes of emptiness; and pay special attention to the order and precautions of the booting and shutdown in the use.
3. Regular machine tool level and accuracy check
There are two types of mechanical accuracy of correction. Its soft method is mainly through system parameters compensation, such as compensation for the inverse gap in the screw, the accuracy of the positioning accuracy of each coordinate system, and the position correction of the reference point of the machine tool. , The roller silk bars nuts are pre -tightened, the reverse gap is adjusted.
