Pay special attention to the safety precautions for mechanical processing, as safety is important. In order to ensure the safety of operators, we must pay attention to the safety precautions and some preparations for mechanical processing.
Mechanical processing safety precautions:
When processing deformed and eccentric components, the workpiece is usually fixed with a flower disc clamp. Therefore, the first thing to pay attention to is a secure installation. Claw. The pressure plate should not extend beyond the diameter of the flower disc, and a protective cover should be installed. Secondly, pay attention to the weight of eccentric components. Important configurations are appropriate. The gap between the inner hole diameter and the screw diameter should be small. The rotation speed of the machine tool should not be too high to prevent centrifugal force from transferring counterweight, contacting the machine tool guide rail, disconnecting screws, and damaging the operator.
What safety requirements should the operating system of machine tool equipment meet?
1. Easy to operate, reduces back and forth movement, and avoids unnecessary bending. Stand on tiptoe.
2. Accurate and reliable positioning to prevent misoperation caused by slight vibration.
3. The movement direction of the operating components of the machine tool equipment and the movement direction of the operated components should meet the requirements and be marked with simple symbols.
4. Install necessary interlocking mechanisms to prevent uncoordinated operating components and accidents when operated by multiple people.
5. Handle. Hand wheel. The structure and arrangement of buttons should comply with regulations. The start button should be installed inside the casing or with a mounting ring to prevent accidental touch. Handwheel installed on the shaft rod. When the handle automatically enters, it will rotate with the shaft, so an automatic separation device should be installed.
