The key component of the core of CNC processing core does not sprinkle water. The key components are not assembled. In addition to the application of CNC machine tools, you have selected some stronger large CNC processing plants to better guarantee quality and quantity. The staff bear the assembly, which can better ensure its smooth operation.
Customers also have to check whether the pipeline is obstructed. The amount of water in the water tank is relatively low. The core of CNC processing is often not sprinkled because there is gas in the centrifugal pump. The gas discharged from the pump can ensure that it can sprinkle all normal water. Compared with other problems, the relative nature of this problem is very easy to deal with.
When processing the CNC high -precision parts CNC lathes, it usually increases the harm of cohesion. Tighten the parts with a three -claw or four -claw card of the lathe, and then terminate the processing of mechanical parts. At the same time, the cutting speed of mechanical equipment above the clamping force should be made to ensure that the parts are not loose and reduce the nominal diameter .. The holding force of the clamping force is increasing and the cutting speed is expanded, and then decreased.
The working capabilities of large CNC processing plants make mechanical parts stable during the entire processing process. As everyone knows, after the three -claw or four -claw card is loosened, the processing parts will be different from the original. Some of the irregular graphics occur, and some have elliptical shapes, which mainly show a relatively large error.
