A drilling machine is a metal cutting machine tool, a CNC machining equipment, with a style and function similar to that of a machining center. What should be paid attention to when using a drilling machine?
1. Before starting the machine, determine the machining requirements for the workpiece. If it is drilling, turn the switch to the drilling indicator. If it is tapping, turn the switch to the tapping indicator.
2. Before homework, it is necessary to carefully inspect the workbench, guide rails, and major sliding surfaces. If there are obstacles, objects, iron filings, impurities, etc., it is necessary to clean, scrub, and oil them. To check the protection, insurance, and signal equipment on the device. The mechanical transmission and electrical parts should have reliable protective equipment. Whether the tools and fixtures are in good condition, otherwise they are prohibited from starting.
3. The platform of the drilling machine needs to be tightened and the workpiece needs to be clamped. When drilling small parts, special tools should be used to clamp them to avoid being lifted and rotated by the processed parts. It is prohibited to hold or press the hole with your hands.
4. Manual feeding is generally carried out according to the principle of gradually increasing and reducing pressure, to avoid causing trouble due to excessive force
5. When adjusting the speed, stroke, clamping and workpiece of the drilling machine, as well as when wiping the drilling machine, it is necessary to park the car.
6. After the drilling machine starts, it is necessary to clamp the workpiece onto the workbench or vice. It is prohibited to use hands to drill or tap the workpiece under any circumstances. Prohibit touching the moving workpieces, cutting tools, and transmission parts of the drilling and tapping machine. Stop transferring or taking objects or other objects through the rotating parts of the machine tool.
7. When wrapping long chips on the drill bit, it is necessary to park the car and remove them. Do not use mouth blowing or hand pulling, and use a brush or iron hook to remove them.
